ANALISIS PENGENDALIAN KUALITAS PADA PROSES BONING SAPI WAGYU MENGGUNAKAN STATISTICAL QUALITY CONTROL (SQC) DI PT. SANTOSA AGRINDO
Abstract
PT. Santosa Agrindo (Abattoir), Kab.Serang-Gunung Kupak, Banten is a company engaged in the supply of processed meat products and beef fattening. One of the products is Wagyu beef which has been boned. This study aims to find the causes of product discrepancies and determine whether the non-conformities that occur are still within control limits or out of control using the Statistical Quality Control (SQC) method. According to the results of the P control chart graph, none of the 12 points is outside the upper or lower control limits. So there is no need for further analysis because everything is still within control limits. Meanwhile, from the results of the Pareto diagram it is known that the most dominant mismatches are 2 (two), namely the findings of feathers and lost vacum with a percentage of hair findings of 65.4% and lost vacum of 28.1%. And based on the highest percentage of mismatches, an analysis was carried out using a cause and effect diagram (fishbone) and it was found that there were several factors causing the mismatch, namely human factors inaccuracy, machine factors, namely old machine age and lack of maintenance, raw material factors, namely raw materials. which has been damaged before use and the method factor, namely the cleaning and trimming process that is not suitable
References
] Agustina, KK. 2017. Proses Pemotongan Ternak.Denpasar (ID): Universitas Udayana
] Ariani, D. W. (2014). Manajemen kualitas.
] Idris, I., Sari, RA., Wulandari, Uthumporn. 2016. Pengendalian Kualitas Tempe Dengan Seven Tools. Medan (ID): Politeknik LP3I Medan. 67-79
] Iqbal, M., & Wiyono, A. S. (2018). Analisis Pengendalian Kualitas Produk Dengan Metode Statistical Quality Control (Studi Kasus Pada UD 2003) (Doctoral dissertation, IAIN Surakarta).
] Hidayatullah Elmas, M. S. (2017). Pengendalian kualitas dengan menggunakan metode Statistical Quality Control (SQC) untuk meminimumkan produk gagal pada toko roti barokah bakery. WIGA: Jurnal Penelitian Ilmu Ekonomi, 7(1), 15-22.
] Kartika, H., & Setia Bakti, C. (2020). Analysis of 6004-2RSL SKF Bearing Inventory By Economic Order Quantity (EOQ) Method in Spart Part Division. Journal of Industrial Engineering & Management Research, 1(1), 17-27. https://doi.org/10.7777/jiemar.v1i1.19
] Muhammad, S. (2015). Quality improvement of fan manufacturing industry by using basic seven tools of quality: A case study. International Journal of Engineering Research and Applications, 5(4), 30-35.
] Nur, R., & Suyuti, M. A. (2020). Mini Press Tool as Learning Practical: Designing, Manufacturing, and Analysis. Journal of Industrial Engineering & Management Research, 1(2), 9-14. https://doi.org/10.7777/jiemar.v1i2.34
] Purwanto, A. (2020). Design of Food Product Using Quality Function Deployment in Food Industry. Journal of Industrial Engineering & Management Research, 1(1), 1-16. https://doi.org/10.7777/jiemar.v1i1.20
] Suwandi, S., & Hari Hadi, A. (2020). Value Analysis Method For Cost Reduction Analysis of Fuel Filter Poducts at PT Duta Nichirindo Pratama. Journal of Industrial Engineering & Management Research, 1(1), 28-36. https://doi.org/10.7777/jiemar.v1i1.22
] Siregar, A. S. (2019). Analisis Pengendalian Kualitas Produk Pellet Dengan Metode Statistical Quality Control (SQC) Dan Statistical Prosess Control (SPC) Di PT. Gold Coin Indonesia Kim II Mabar (Doctoral dissertation, Universitas Medan Area).
