Increasing Production Yield With Through Feasibility Investment Analysis in Plastic Recycling Industry

Ade Sophian; Hasbullah  Hasbullah

doi:10.7777/jiemar.v2i6.244

Ade Sophian Industrial Engineering Dept., Universitas Mercu Buana
Hasbullah Hasbullah Industrial Engineering Dept., Universitas Mercu Buana

DOI: https://doi.org/10.7777/jiemar.v2i6.244

Abstrak

The plastics recycling industry in Indonesia can only fill 82% of national needs. Based on the Survey of this study, plastic recycling industries around Jakarta have a capacity of 80% of their ability. In failure to achieve production capacity, this article aims to increase production yield. By investigating a plastic recycling industry in Bogor with about 320 Kg/hour production from 400 Kg/hour capacity, this study aims to improve the output at Geording Machine Line by replacing old machines, which most contributed to the failure of production yield. In Production Line consists of five Work Stations (WS): WS-1, WS-2, WS-3, WS-4, and WS-5, having bottlenecks of 78.00 minutes that shall be 60 minutes ideally to produce 400 kg/hour on WS-4. Feasibility of Investment Analysis shows that buying a new machine for WS-4 makes it feasible to prevent more loss in failure production yield.

Referensi

E. Industry, “https://www.marketsandmarkets.com/ Market-Reports/recycled-plastic- market-115486722.html 1.,” 2022.

K. Perindustriaan, “’PERAN INDUSTRI PLASTIK DALAM MENGELOLA SAMPAH PLASTIK YANG DIHASILKAN,” 2020.

K. Kaiser, M. Schmid, and M. Schlummer, “Recycling of polymer-based multilayer packaging: A review,” Recycling, vol. 3, no. 1, 2018, doi: 10.3390/recycling3010001.

H. N. Hapsari and T. P. Damanhuri, “Studi Persebaran Pelaku Daur Ulang Sampah Plastik Air Minum Dalam Kemasan (Studi Kasus: Kota Bandung),” J. Tek. Lingkung., vol. 15, pp. 71–80, 2009.

U. B. Surono, “Berbagai metode konversi sampah plastik menjadi bahan bakar minyak,” J. Tek., vol. 1, no. 2, pp. 32–40, 2013, doi: 10.33005/envirotek.v9i2.966.

R. Suci, “Kemenperin Dukung Industri Daur Ulang Plastik,” Jurnal Jabar, 2021. .

Liker, The Toyota Way Field Book, vol. 19, no. 1. New York, 2004.

Womack et al., “Book Review: The Machine That Changed The World,” Mem. Stud., vol. 3, no. 2, pp. 179–183, 1990, doi: 10.1177/1750698009355679.

D. L. S. K. Zahra, “Penggunaan Konsep Lean untuk Meningkatkan Efisiensi Pelayanan Instalasi Farmasi Rawat Jalan,” J. Adm. Rumah Sakit, vol. 2, no. 1, pp. 29–42, 2015.

A. A. Karam, M. Liviu, V. Cristina, and H. Radu, “The contribution of lean manufacturing tools to changeover time decrease in the pharmaceutical industry. A SMED project,” Procedia Manuf., vol. 22, pp. 886–892, 2018, doi: 10.1016/j.promfg.2018.03.125.

F. Sieckmann, H. N. Ngoc, R. Helm, and H. Kohl, “Implementation of lean production systems in small and medium-sized pharmaceutical enterprises,” Procedia Manuf., vol. 21, no. 2017, pp. 814–821, 2018, doi: 10.1016/j.promfg.2018.02.188.

M. Raweewan and F. Kojima, “Digital lean manufacturing - Collaborative university-industry education in systems design for lean transformation,” Procedia Manuf., vol. 45, no. 2019, pp. 183–188, 2020, doi: 10.1016/j.promfg.2020.04.092.

A. Ghezzi, “How Entrepreneurs make sense of Lean Startup Approaches: Business Models as cognitive lenses to generate fast and frugal Heuristics,” Technol. Forecast. Soc. Change, vol. 161, no. September, p. 120324, 2020, doi: 10.1016/j.techfore.2020.120324.

Wilson, How to Implement Lean Manufacturing. New York: McGraw-Hill, 2010.

A. Rozak, C. Jaqin, and H. Hasbullah, “Increasing overall equipment effectiveness in automotive company using DMAIC and FMEA method,” J. Eur. des Syst. Autom., vol. 53, no. 1, pp. 55–60, 2020, doi: 10.18280/jesa.530107.

D. Agung and H. Hasbullah, “Reducing the Product Changeover Time Using Smed & 5S Methods in the Injection Molding Industry,” Sinergi, vol. 23, no. 3, p. 199, 2019, doi: 10.22441/sinergi.2019.3.004.

I. E. Qassim, J. A. Reyes, and V. Kumar, “Lean readiness – the case of the European pharmaceutical manufacturing industry,” Int. J. Product. Perform. Manag., vol. 67, no. 1, pp. 20–44, 2018, doi: 10.1108/IJPPM-04-2016-0083.

G. Dalton et al., “Feasibility of investment in Blue Growth multiple-use of space and multi-use platform projects; results of a novel assessment approach and case studies,” Renew. Sustain. Energy Rev., vol. 107, no. January, pp. 338–359, 2019, doi: 10.1016/j.rser.2019.01.060.

U. Halden, U. Cali, M. F. Dynge, J. Stekli, and L. Bai, “DLT-based equity crowdfunding on the techno-economic feasibility of solar energy investments,” Sol. Energy, vol. 227, no. September, pp. 137–150, 2021, doi: 10.1016/j.solener.2021.08.067.

H. Hasbullah and M. Nasir, “Pricing of Medical Instrument Products for Domestic Production through Investment Feasibility Analysis,” ComTech Comput. Math. Eng. Appl., vol. 12, no. 1, pp. 9–18, 2021, doi: 10.21512/comtech.v12i1.6605.

R. O. Swalm, Engineering economy, vol. 10, no. 4. 1965.

K. Koskela-huotari, B. Edvardsson, J. M. Jonas, D. Sörhammar, and L. Witell, “Innovation in service ecosystems — Breaking , making , and maintaining institutionalized rules of resource integration,” J. Bus. Res., 2016, doi: 10.1016/j.jbusres.2016.02.029.

H. B. Huang, “What is good action research ?,” vol. 8, no. 1, pp. 93–109, 2010, doi: 10.1177/1476750310362435.